|
WKE Series
To
order, click HERE
Featuring the Exclusive BREEZAIRE Sentinel II Microprocessor
Control System. WKE Series systems with the SENTINEL II
microprocessor-based control system are the most advanced
systems available on the market. No other company offers the
BREEZAIRE Sentinel II performance at any price.
|
SENTINEL II features a separate control panel with an
LCD display that can be mounted on the cabinet or in a
remote location. The control panel provides a constant
readout of the temperature, including a separate alarm
indicator light, which allows the user to change all
operating parameters at any time. Built-in diagnostic
routines display trouble codes on the LCD. Optionally
the system can be connected to a home alarm system.
The system also automatically controls fan speed to
reduce energy use and noise while providing the optimum
cooling under all conditions. WKE Series systems are
compact, self-contained units.
Units are shipped from the factory fully charged and
ready for use when mounted in a wall and connected to
115 AC volt source.
There are 4 models to choose from
| Model |
Enclosure Volume |
Electrical |
Dimensions (in) |
Weight |
| WKE 3000 |
650 cu.ft. |
5 Amps |
14.25W x 19.75H x 21.63D |
76 lb. |
| WKE 4000 |
1000 cu.ft. |
7 Amps |
14.25W x 19.75H x 21.63D |
81 lb. |
| WKE 6000 |
1500 cu.ft. |
9.5 Amps |
16.25W x 22.00H x 22.25D |
101 lb. |
| WKE 8000 |
2000 cu.ft. |
10 Amps |
16.25W x 22.00H x 22.25D |
101 lb. |
|
|
|
WKC/WKCE Series
To
order, click HERE
The BREEZAIRE WKC/WKCE Series cooling units are a compact
design with cold air discharge on the bottom, which makes them
ideal to be installed in cabinets.
Because of their configuration the WKC/WKCE series cooling
units are not rated for specified number of cubic feet. They are
intended for cabinets and other constricted enclosures. Ask your
BREEZAIRE Dealer for details.
|
The WKC cooling unit comes with two (2) optional
thermostat systems. Mechanical (WKC Model) or Digital
Electronic (Sentry III) (WKCE Model).
The WKC Model has a mechanical thermostat and its
adjustments requires a 1/4" straight type
screwdriver. Turning the adjusting screw clockwise
lowers the set point, counter-clockwise raises it.
|
|
|
|
The WKCE Model has a digital electronic (Sentry III)
thermostat that adds additional safety and convenience
features:
|
- Large, easy to read, green LED
display.
- Accurate, easy to adjust (no tools
needed) readable set points with continuous reading
of enclosure temperature or displaying of set point
when changing enclosure temperatures.
- Power outage protection, which
delays unit start up after power outages.
- Blocked airflow protection, which
shuts down unit and protects wine in case of high
temperatures caused by condenser blockage.
- Controls temperature by enclosure
air sensors or optional bottle probe.
|
|
|
Units are shipped from the factory fully charged and ready
for use when mounted in a wall and connected to 115 AC volt
source.
There are two sizes and four models to chose from:
| Model |
Electrical |
Dimensions (in) |
Weight |
| WKC 1060 |
3 Amp |
18W x 10.5H x 16.5D |
45 lb. |
| WKCE 1060 |
3 Amp |
18W x 10.5H x 16.5D |
45 lb. |
| WKC 2200 |
4 Amp |
18W x 10.5H x 16.5D |
55 lb. |
| WKCE 2200 |
4 Amp |
18W x 10.5H x 16.5D |
55 lb. |
WKS Series
To
order, click HERE
When our self-contained series will not meet your needs then
the WKS split design will provide the flexibility needed to
create an ideal installation or deal with unusual site problems.
BREEZAIRE WKS Series cooling systems are special split systems
that allow mounting of the cooling (evaporator) module in the
enclosure to be cooled and the exhaust (condenser) module as far
as 100 feet away. The systems are designed - when installed in a
properly constructed enclosure - to provide a constant
selectable temperature between 48 and 63 degrees Fahrenheit
while maintaining 50 to 75 percent relative humidity.
|
WKS Series systems are designed for easy installation
by any, properly equipped, qualified air conditioning or
refrigeration service technician. Two copper tubes
connect the two modules and power is hard wired to the
units using adequately sized 110 AC volt electrical
source. These systems must be charged with refrigerant
during installation. The WKS series uses BREEZAIRE's
rugged adjustable mechanical thermostat.
|
|
|
There are two models to choose from
| Model |
Enclosure Volume |
Electrical |
Dimensions (in) |
Weight |
| WKS 2200 Fan/Coil |
265 cu.ft. |
1 Amp |
22.00W x 11.00H x 8.00D |
25 lb. |
| WKS 2200 Condenser |
265 cu.ft. |
4 Amps |
14.00W x 10.00H x 12.00D |
35 lb. |
| WKS 4000 Fan/Coil |
1000 cu.ft. |
1.5 Amps |
14.25W x 19.75H x 12.38D |
45 lb. |
| WKS 4000 Condenser |
1000 cu.ft. |
7.5 Amps |
14.25W x 19.75H x 12.38D |
55 lb. |
|
